3
4
Specifications
How to Use
How to Use
1. Remove and assemble the extension tube and main Floor Brush or crevice nozzle from the box.
6. How to clean the HEPA filter from the Filter Outer Shelf.
7. Wall Mout Base for main unit and crevice brush.
2. Connect to the power supply.
3. Switch on the power supply and press the ON/OFF Power Button to start operating the vacuum.
4. The Dust Container should be emptied regulary to obtain consisten best results.
5. How to empty the dust container.
a. Insert the extention tube to the vacuum
body
b. Insert the main floor brush or crevice nozzle to
the extension tube
a. Remove the extension tube
then take it out
b. Press the release button
c. Empty the dust container
* Specifications are subject to change without prior notice.
Model
Voltage
Power
Suction power
Noise Level
Air Flow
Dust Container Capacity
Cable Length
Filtration Type
Net Weight
Product Dimension (LxWxH)mm
:
:
:
:
:
:
:
:
:
:
:
VC66B
220-240V~ 50-60Hz
600W
120W; 15kPa
80dB
78m /h
0.8L
5m
HEPA
2kg
375 x 135 x 220mm
VC68P
220-240V~ 50-60Hz
600W
120W; 15kPa
80dB
78m /h
0.8L
6.8m
HEPA
2.2kg
375 x 135 x 220mm
3
3
a. Turn the Filter Outer Shelf
anti-clockwise to detach
from the dust container
b. Remove the HEPA
Filter from the outer
shelf
c. Tap the HEPA filter
against the side of the
dustbin to remove
excess dust
a. Nail the wall mout base on the flat surface and insert the main
unit into the base.
b. Place the crevice nozzle next to the main unit
d. Use the soft brush to
remove dirt from the
pleats
“tap”
“tap”
U N
LO
CK
Note :
The appliance and the filter should be cleaned regularly in order to maintain the suction power.
