KHIND EAC20, Инструкция по эксплуатации

Страница: 4 / 28

EN
4
Note:
i) The Honeycomb Filter is required to be replaced to its original position so that the lifespan of
cooler and its motor would not be affected.
ii) During humidifying, it is prohibited to remove or install Filter Net and Honeycomb Filter.
iii) After long time operation, Honeycomb Filter will becomes clogged with dust, which will
greatly affect the unit’s performance. It is recommended to clean Honeycomb Filter frequently.
Caution
10. This appliance is intended for household use only. Not for commercial use.
11. Do not use the appliance other than its intended purpose. Do not use accessories other than
what is approved by Khind-Mistral (M) Sdn Bhd.
12. Do not put the appliance upside down after filling water. Do not tilt or collide while placing
or moving the appliance to prevent water splashing after filling water.
13. Keep the appliance dry to protect against electric shock.
14. Do not strike or shake the appliance body during operation, otherwise, it will stop working
automatically. In this case, restart the appliance again.
15. Do not lean the appliance against walls or curtains or other objects which might block the air flux.
16. Do not install this appliance in locations containing inflammable or explosive gases and sprays. Do
not expose it directly to sunlight for a long period of time.
17. Do not insert fingers, wooden sticks, metal sticks or other objects into the louvers.
18. Do not adjust the automatic louvers by hand or it will damage the louver’s motor.
19. Unplug the appliance during filling and cleaning.
Cleaning & Maintenance
1. For further cleaning purposes, follow details below:
a) MAKE SURE to switch off power, pull off the power plug and let the appliance to cool down
before cleaning or the appliance is not used anymore. Otherwise, there is a risk of electric shock.
- Clean up the surface of the machine body by wiping with a damp cloth (you can optionally
add a little detergent). DO NOT clean with gasoline, cleaning naphtha, corrosive cleaning
agents or solvents, DO NOT flush (leach) with water.
- Clean dust. DO NOT hit it forcefully with a stick.
b) Clean Water Tank
- Pull out the water tank, fill and clean it with clean water. Do not clean the tank with gasoline,
cleaning naphtha, corrosive cleaning agents or solvents. Finally, dry up the surface with a soft
cloth.
c) Clean Honeycomb Filter
- Take Honeycomb Filter assembly out.
- Pull Honeycomb Filter out, simply flush (leach) it with clean water.
Honeycomb
Filter
Honeycomb
Filter
Assemble
Rear
Filter Net