KGUARD Standalone DVR KG-SH122E.V2/SH222E.V2/SH522E.V2 User Manual(Software)
28
www.kguardsecurity.com
All rights reserved
Setting procedures
STEPS
MOUSE
Button/Remote control
STEP 1
Click on
”Alarm”
icon.
1.Press
”Enter”
button to go
to the page.
STEP 2
The
“Alarm setup”
menu will be
displayed.
2. Press
▲▼
button to
select the items.
STEP 3
Click
+/-
button to select the options.
3. Press
”Enter”
button.
STEP 4
Right click for EXIT and then click on
”ESC”
Icon for EXIT.
4. Press ”
ESC”
button for
exit.
All Functions
No.
Functions
Description
Button/Remote
control
1
Normal State
To select the connection type of
alarm (
NC/NO/N/A
).
Press
+/-
button ,to
select
N/A
,
Close
or
Open
2
Focus Camera
The camera corresponding to this
alarm input.
Press
+/-
button to
adjust the value.
3
Duration
The delay time of Alarm and
buzzer after the alarm input was
triggered
Press”
ENTER”
or
+/-
button
(Mouse: Left
click)
4
Goto Preset
To define the preset position to
go to for the
“Camera to go”
Camera in last field if video loss
was detected.
(For PTZ camera only)
Press”
ENTER”
or
+/-
button
(Mouse: Left
click)
.
Pre-record
To define the delay time of alarm
before alarm input was triggered.
Press
+/-
button
(Mouse: Left click)
5
Post-record
To define the delay time after
this alarm input was triggered.
Press
+/-
button
(Mouse: Left click)
6
Alarm Out
To define which Alarm Output
will be triggered when the alarm
input was triggered.
Press
+/-
button
(Mouse: Left click)
Alarm Outputs (
NC (1), NO (2)
).
