KEYTRONIX I-SAD 19"-S, Руководство по эксплуатации

Страница: 64 / 74

Configuration
64
Humidity Sensor / HS commands:
HS-DESCRIPTION xx Description of the humidity sensor (max.60
characters)
HS-MONITORING xx Activates the humitidy-sensor;
Values: xx=yes or xx=no
HS-HIGH-WARNING xx If the entered value is exceeded, an alarm
will be sent.
HS-HIGH-ALARM xx if the entered value is exceeded, an alarm
will be sent.
HS-LOW-WARNING xx If the humidity drops below the entered
value, an alarm will be sent.
HS-LOW-ALARM xx If the humidity drops below the entered
value, an alarm will be sent.
HS-HYSTERESIS xx The entered determines by how much the
humidity must change, before the alarm
status changes.
Telnet /RS232 Port commands:
TN-RS232 [Baudrate] [flow control] [parity] [stop bits] [data bits]
Configures the Interface
Values:
Baudrate 110, 300, 600, 1200, 2400, 4800, 9600,
14400, 19200, 38400, 57600, 115200
Flow control xon/xoff, hw, none
parity even, odd, none
stop bits: 1,1,5,2
data bits: 7,8
TN-PORT [port number] [timeout] [Echo] [CRLF][Mode]
Configures the Telnet Port.
reboot after SAVE-CFG required!
Values:
Timeout in Sekunden, 0= kein timeout
Echo AUTO / NOECHO / ECHO
CRLF CRLF / CR / LF
Mode AUTO / CHARMODE / LINEMODE