Keyton SensorScan, Руководство пользователя

Страница: 12 / 96

12
recliners
Back Recliner | Manual control.
To operate the back recliner independently, keep these keys pressed until the
recliner has reached the desired position.
Once the key is released, the recliner will automatically stop.
Footrest Recliner | Manual control.
To operate the footrest recliner independently, keep one of these keys pressed
until the recliner has reached the desired position.
Once the key is released, the recliner will stop automatically.
General reclining both manual and automatic
Manual control: press this key until the recliner reaches the chosen position. Release it to stop. Press once
again and it will move in the opposite direction.
Automatic control: a short click will start the recliner movement. A second click will stop it. The third and fourth
clicks will bring the recliners to the sitting position.
Massage Down
Press this key to locate the massage on
a lower area. Release this key and the
vertical massage movement will locate
on the desired point. Every two minutes
a massage is performed on the whole
back.
You can initiate the localized massage
with a short press (less than 1 second).
In order to activate again the complete
vertical movement, press any massage
key.
Massage Up
Press this key to locate the massage on
an upper area. Release this key and
the vertical massage movement will
locate on the desired point. Every two
minutes a massage is performed on
the whole back.
You can initiate the localized massage
with a short press (less than 1 second).
In order to activate again the complete
vertical movement, press any massage
key.
locators / localized massage
With the Kneading, Complete-1, Complete-2, Complete-3 and Sensitive massage programmes, the
system will perform a horizontal massage in all points shown in figure 1.
note
You should activate any manual massage (Tapping, Rolling, Kneading, Complete-1, Complete-2 or Complete-3),
otherwise the localized Rolling massage will start as a default solution.
note
Figure 1