WT07
WIFI PANIC KNOB
- Built-in WIFI module that sends all alerts to your Smartphone
- Super low power consumption, typically only 2 x AAA batteries/year
- Separate low battery and loss of signal notifications
- Life-time cloud service provided free of charge
- Powerful APP for your Smartphone provided free of charge
- User can create floorplans in the APP showing device location
- APP records last 30 activations time and date stamped
- 3M double sided tape for permanent fixing included
- Blue LED for status indication
Once the magnet (smaller part with the handle) is moved away from the reed switch (built into the larger part), the unit will send an
alarm signal to your smart phone via your home/business WIFI connection. Such signal is selectable as an Alarm Sound + Notifica
-
tion, Notification Sound + Notification or just a silent Notification. By using our powerful free APP and free worldwide cloud service,
a user can monitor the safety or security of a location ANYTIME, ANYWHERE!
Getting started
Congratulations on your purchase of this powerful WIFI Panic Knob. This product works together with your smart phone and
internet via WIFI. Please check that your smart phone is either an Android or IOS (iPhone) and that the latest firmware has been
installed. Please also check that your WIFI router is working properly and that its operating manual confirms that it operates on 2.4
GHz with WPA/WPA2 encryption.
Installing the APP
1/
2/
3/
Setting up your PANIC KNOB
1/
2/
3/
Before powering up the Sensor, please install our free ‘NEXUSHOME ‘ APP onto your phone. The APP is available in an IOS version
on the Apple App Store and an Android version on the Google Play Store. Ensure your phone is connected to WIFI to complete
your account setup.
Once downloaded, click and open the APP. The following message will appear. Please click OK.
Now complete your User Profile by inputting your email address and a 6 digit password. Click the REGISTER button, check your
email and click the link in the email from “Netify” to complete registration.
After completing the APP registration, you are now ready to setup each Sensor.
Carefully unscrew and open the battery cover. Insert two new, good quality
Alkaline AAA batteries, ensuring correct polarity.
Connect the Sensor to your smartphone using the cable that has been
provided
a- one side is a 3.5mm audio jack which you need to plug into the
headphone output of your smartphone.
b- the other side is a micro USB jack which you need to plug into the small
USB socket on the side of the Sensor.
Choose the Building location where you eventually wish to permanently install
your Panic Knob. Look at your smart phone at that location and ensure you
have a good and steady WIFI connection there.
1
1
2
2
3
3
install
click OK
register
