Swing Control and Tilting Adjustment
Press down…Swivel starts.
Pull up…Swivel stops.
Always switch the fan off
before making a tilt adjustment.
The air flow can be adjusted
upward or downward simply by
moving the guard up or down.
How to Assemble
WARNING!
Do not insert the plug into the power point before assembly is complete.
(May cause electric shock or injury)
Do not press height adjustment button while fan and fan guard are
detached.
(The motor section (slide pipe) may jump out of stand, causing injury.)
Fix the stand onto the base
Remove the motor shaft
cover.
Check the stand direction
by the indication of front
and back of the base and
stand, then push the whole
stand part down onto the
base until it is fitted in firmly.
Placing the motor shaft
upward, then fix the stand and
base by turning the base
fixing ring provided clockwise.
Fixing Rear Guard and Fixing Fan Blade
Fixing Rear Guard
Couple protrusions (three) on the motor
section to concaves (three) on the rear
guard.
Fix them firmly by turning the guard
fixing ring toward [fasten].
Fixing Fan Blade
Couple the pin on the motor shaft and the
concave on the fan blade and insert the
fan part into the motor part. Then pressing
the fan part towards the motor part turn the
fan blade cap toward [fasten] to fix them
firmly.
CAUTION
If the fan blade cap is not fastened firmly
enough, fan blade may come off, causing injury.
Be careful not to be injured by motor shaft or pin when assembling or
P5-14606
P6-14606
