Maintenance and Storage
WARNING
When cleaning, the plug must be removed from the power point. Do not
handle plug with wet hands.
[May cause electric shock or injury.]
Do not press the height adjustment button while the fan and fan guard are
detached.
[The motor section (slide pipe) may jump out of the stand part, causing injury.]
When disassembling the base or stand, unplug plug from the power point.
[May cause electric shock or injury.]
How to Clean
Disassemble the fan and guard in the inverse order of assembling. Wash off dirt
and dust with well squeezed wet soft cloth with water or neutral detergent, then
wipe off the detergent.
CAUTION:
Do not use volatile solvents such as gasoline, thinner, benzene, wax,
kerosene, alcohol, polishing powder, or alkaline detergent. These may
discolour or damage the machine, causing injury.
If using a chemical dust cloth, follow those instruction.
Do not oil plastic. May cause discoloration or injury from damaged parts.
How to Store
Disassemble fan, guard, stand and base in the inverse order of assembling.
Clean the motor shaft and oil put the motor shaft cover back to the motor shaft.
Store three parts in the box provided at purchase and keep in a dry place.
CAUTION:
When the fan is not facing front, do not force the fan to turn. Use the swivel
function.
Clean the fan and guard referrring to [ How to Clean], then store it.
How to Disassemble the Base
1. Put the motor shaft upward, then unscrew fixing ring by turning anticlockwise.
(Refer to the drawing at below)
Holding the base firmly, press the stand hook.
Then pull the base and remove the stand hook.
CAUTION:
If the motor shaft is facing downward, the will become unstable and may
damage the product or floor.
When putting the motor shaft down, the fan is unstable. May cause machine
failure and damage to floor.
2. Hold the stand firmly and gently lift and remove the base.
Technical Specifications
Voltage
120V~60Hz
Power Consumption
?A or ?W
Fan Speed
STOP/ LOW - MID - HIGT
Timer
1min ~ 180min
Product Holder
Join-One Electric (Shenzhen) Co.,Ltd
Subject to technical modification
P8-14606
P9-14606
P10-14606
