1
Calibration Procedures
54
Keysight U1241C/U1242C Service Guide
Calibration Error Codes
The following errors indicate failures that may occur during a calibration.
Table 1-16
Calibration error codes
Error code
Description (error message)
200/E200
Calibration error: calibration mode is secured
002/E002
Calibration error: secure code invalid
003/E003
Calibration error: serial number code invalid
004/E004
Calibration error: calibration aborted
005/E005
Calibration error: value out of range, or signal measurement out of range
006/E006
Calibration error: signal measurement out of range
007/E007
Calibration error: frequency out of range
008/E008
EEPROM write failure