Keysight TS-5020, Руководство по подготовке места и установке

Страница: 29 / 45

Site Preparation and Power Requirements
3
TS-5020 Automotive Electronics Functional Test System Site Preparation and Installation Guide 3-5
System Plan Drawing
A system plan diagram should be used for all aspects of site
preparation. A complete drawing details power availability,
communications cabling, and system placement with respect to
other equipment. It can also serve to verify physical access.
Figure 3-2
shows a recommended layout for a typical TS-5020
Automotive Electronics Functional Test System. Allow 1 meter
(3.3 feet of space) behind the system for service.
WA R N I N G
The Remote ON/Standby switch at the upper right-hand corner of
the system rack turns off all equipment. The Main ON/OFF switch
is located on the Keysight E1135C Power Distribution Unit (PDU),
located behind the rear cabinet door of the system (see
Figure 3-3
). ALWAYS allow 1 meter (3.3 feet of space) behind the
system to be able to access the ON/OFF switch at the rear of the
E1135C PDU.
Figure 3-2 Recommended TS-5020 Automotive Electronics Functional Layout (overhead view)
600mm
(23.6in)
905mm
(35.6in)
1000mm
(39in)
BARRIER
TS-5020 RACK
(TOP VIEW)
Instrument and service
access area