Keysight TS-5020, Руководство по подготовке места и установке

Страница: 20 / 45

2-6 TS-5020 Automotive Electronics Functional Test System Site Preparation and Installation Guide
2
Safety and Regulatory Information
Terminal for neutral conductor on permanently installed equipment.
Terminal for line conductor on permanently installed equipment.
Standby (supply); units with this symbol are not completely
disconnected from ac mains when this switch is off. To completely
disconnect the unit from ac mains, either disconnect the power cord, or
have a qualified electrician install an external switch.
Regulatory markings
The CE mark is a registered trademark of the European Community. If it
is accompanied by a year, it indicates the year the design was proven.
The CSA mark is a registered trademark of the Canadian Standards
Association. A CSA mark with the indicators “C” and “US” means that
the product is certified for both U.S. and Canadian markets, to the
applicable American and Canadian standards.
The C-tick mark is a registered trademark of the Spectrum
Management Agency of Australia. This signifies compliance with the
Australian EMC Framework regulations under the terms of the Radio
Communications Act of 1992.
ISM - 1A This text indicates that the instrument is an Industrial Scientific and
Medical Group 1 Class A product (CISPER 11, Clause 4).
Safety symbols
N10149