Waveguide flange
Frequency GHz
Standard transmission/reflection modules
Standard transmission/reflection modules with
25 dB mechanical attenuator
WR15
50-75
N5262AW15-700
N5262AW15-701
WR10
75-110
N5262AW10-700
N5262AW10-701
WR8.0
90-140
N5262AW08-700
N5262AW08-701
WR6.0
110-170
N5262AW06-700
N5262AW06-701
WR5.1
140 - 220
N5262AW05-700
N5262AW05-701
WR3.4
220 -325
N5262AW03-700
N5262AW03-701
WR2.2
325-500
N5262AW02-700
N5262AW02-701
WR1.5
500 - 750
N5256AW01-700
N5256AW01-701
WR1.0
750 – 1100
N5262AW01-700
No Attenuator Option
Notes
1. Each product number includes a single frequency extender that supports all PNA/PNA-X and test sets.
2. Add required power supply and cable option for the frequency extenders.
3. For full 2-Port S-parameter measurements order quantity 2 of the Tx/Rx modules listed above.
4. When used with N5261A or N5262A test set controller, add a power supply and cable options.
5. Options 700 /701 WR1.5 extenders are not supported for use with the N5261A/62A.
Banded Solution Configuration
Millimeter-wave calibration kits (OML Inc.)
Waveguide flange
Frequency GHz
Calibration kit
WR15
50 - 75
V11644A
WR12
60 - 90
N5260AC12
WR10
75 - 110
W11644A
WR08
90 - 140
N5260AC08
WR06
110 - 170
N5260AC06
WR05
140 - 220
N5260AC05
WR03
220 - 325
N5260AC03
WR02.2
325 - 500
N5260AC02
Extended WR12
56 - 94
N5260AC12
Banded waveguide transmission reflection modules (Virginia Diodes Inc.)
Waveguide flange
Frequency GHz
Standard receiver only modules
High sensitivity receive only module with external
fixed attenuator
WR15
50-75
N5262AR15-700
N5262AR15-701
WR10
75-110
N5262AR10-700
N5262AR10-701
WR8.0
90-140
N5262AR08-700
N5262AR08-701
WR6.0
110-170
N5262AR06-700
N5262AR06-701
WR5.1
140 - 220
N5262AR05-700
N5262AR05-701
WR3.4
220 -325
N5262AR03-700
N5262AR03-701
WR2.2
325-500
N5262AR02-700
N5262AR02-701
WR1.5
500 - 750
N5256AR01-700
N5256AR01-701
WR1.0
750 - 1100
N5262AW01-700
Not Available
Notes
1. Each product number includes a single frequency extender only.
2. Add required power supply and cable options at time of order.
3. The above are receiver only and require a Tx/Rx module for 1 path 2-port S-parameter measurement capability.
4. When used with N5261A or N5262A test set controller, add a power supply and cable options.
5. Options 700 /701 WR1.5 extenders are not supported for use with the N5261A/62A.
Banded waveguide receive only modules (Virginia Diodes Inc.)
18 | Keysight | Antenna Test – Selection Guide