14 Installation Note N5232-90101
Installation Procedure for the Upgrade
-
Figure 1
Source Attenuator Assembly
Step 7. Install the A29 and A30 Source Attenuator Assemblies
Refer to
for this step of the procedure. New parts are listed in
1. Install both source attenuator assemblies to the deck as shown, using two
screws (0515-0372) with each assembly. Use a T-10 TORX driver set to 9
in-lbs to tighten all screws.
Figure 2
Source Attenuators Installation
Содержание N5231B
Страница 29: ...Installation Note Xxxxx xxxxx 3 ...