Using the Probes
1
N2795/6A User’s Guide
13
Rigid or Spring Tips with
Offset Ground or Ground Blade
These rigid and spring-loaded tips are
replaceable. To change the probe tip, pull it
straight out of its contact socket along the axis
of the probe. Once the probe tip is removed,
the new tip can be inserted into the contact
socket along the axis of the probe. In order to
insert the probe tip completely into the
housing, carefully press the probe tip against a hard surface.
It is recommended that the spring tips be used with the ground
blade as both the tips and ground blade are spring-loaded and will
maintain contact with the device under test even when your hand
moves slightly.
The rigid/spring tips and grounds can be mixed with no effect on
performance. It is simply a matter of personal preference. Spring
loaded probe tips offer a method of probing signals that is less
susceptible to vibration or movement than traditional rigid tips.
Many users find it easier to use this type of tip. The spring loaded
tips work when they are either partially or fully compressed and are
protected against over compression damage. The recommended
grounding accessory for the rigid probe tip is the offset ground.
Figure 4
Sprint and Rigid Tips with Offset and Blade Ground
Содержание N2795/6A
