Keysight M9502A, Руководство пользователя

Страница: 20 / 142

10 Keysight M9502A/M9505A AXIe Chassis User Guide
Introduction AXIe Instrument Modules
AXIe Instrument Modules
The chassis slots accept AXIe instrument modules. These may comprise one or
more instruments for signal injection, data acquisition, and measurement. Install
them in any available AXIe slot.
There are two special type of instrument modules which—if used—are most
typically installed in slot 1 (consult the module vendor for specific slot placement
requirements).
- An instrument hub module — a specialty instrument module which also acts
as a hub for a secondary vendor-defined x4 data fabric.
-
An integrated controller module — this is a host PC with a form factor and
backplane connections specifically designed for an AXIe chassis. It uses the
chassis backplane for PCIe and LAN connection to the ESM.
The drawing below illustrates the AXIe module’s general layout, backplane
connections and chassis fasteners, viewed from the top.
Test connections are made at the module’s front panel. The front panel and
backplane connectors will vary depending on the module.
Module Front Panel
Module Insertion/Extraction Handle
Retaining Screw
Typical AXIe Instrument Module
Module Rear (connectors to chassis backplane)