Keysight M9384B, Руководство для стартапов, Страница: 45 / 59

Step 3: Prepare and Power up the Signal Generator
Using Windows Tools
Setting Up the Remote Computer
The procedure depends on whether the Remote Computer to be set up is running
Windows 10, or another version of Microsoft Windows.
Remote computer running Windows 10: Windows 10 includes the Remote
Desktop Connectivity Client software, so no additional setup is required.
Remote computer running another version of Windows: You can use any ver-
sion of Windows to install and run the Client software for Remote Desktop
Connectivity. However, you need to have a Windows installation CD-ROM
available to run the Client software.
The following instructions relate to software provided by
Microsoft Corporation. Keysight offers no warranty regarding the
operation of such software. The procedure described here may
be changed by Microsoft at some future time.
Installing the Client Software
Step Notes
1. When the Welcome Screen appears,
click Perform additional tasks
2. From the What do you want to do?
screen, click Set up Remote Desktop
Connection. The Remote Desktop Connection InstallShield
Wizard appears.
3. Click Next. Follow the on screen instructions provided by
the Wizard.
4. To access the installed software, click
Start > All Programs > Accessories >
Communications > Remote Desktop
Connection.
How to locate the computer name of the Instrument
To connect a remote computer to the instrument, you need to know its Computer
Name. The Computer Name can be displayed as follows:
Locating the Name from the Keysight Application
Step Notes
On the instrument front panel, press System >
Show > System. A page listing various parameters appears.
The instrument’s computer name is shown
in the list next to the title Computer Name.
M9384B Startup Guide 45