Keysight M9384B, Руководство для стартапов, Страница: 39 / 59

Step 3: Prepare and Power up the Signal Generator
Disk Drive Recovery Process
Additional software that has been installed after the instrument was shipped
from the factory. (Thus, following an Instrument Recovery, any software
installed after the instrument was shipped from the factory, needs to be re-
installed.)
System configurations (for example user accounts, windows configurations)
that have been made after the instrument was shipped from the factory.
(Thus, following an Instrument Recovery, configuration changes have to be
performed.)
The Instrument Recovery overwrites the contents of the C: partition. It does
not affect the D: or E: partitions.
It is recommended that you use a regular back up strategy. Your IT department may
already have a backup strategy in place that is suitable for the instrument and its
data. Using the Instrument Recovery System in conjunction with a regular back up
strategy should allow you to fully recover the instrument's software and data.
Recovery Process
Step Notes
1. Make sure the instrument is turned
off.
2. Turn on the instrument.
Press the Down Arrow key to
move the highlight to
Instru-
ment Recovery System , then
press Enter.
After the Keysight Technologies screen is
displayed,
This screen is displayed for five seconds.
M9384B Startup Guide 39