Step 3: Install the Software
Power up the Controller
Remote Controller
If you are using a remote controller, install the cable interface and then power up the
host PC. If you are using an Keysight M9045B or M9048A Interface, please refer to the
included documentation for further details.
If you are using a remote controller, Shut Down the PC BEFORE
you power down the chassis. When you restore power, power up
the chassis, and wait for the chassis & module status indicators to
be ready BEFORE you power up the PC.
Embedded Controller
If you are using an embedded controller, complete the following steps:
1. Install the embedded controller module into the compatible chassis. The Keysight
M9018A PXIe chassis is recommended. Please refer to the chassis documentation
for further details.
2. Connect peripherals (mouse, keyboard, monitor), then power up the chassis.
14
Keysight M9202A PXIe Digitizer, Startup Guide