Keysight M5200A, Руководство для стартапов

Страница: 4 / 80

4 M5200A PXIe Digitizer Modules Startup Guide
Refer to Safety information on page 77 for module-specific safety considerations.
Environmental Conditions
This instrument is intended for “indoor use” only.
The following table shows the environmental requirements and the corresponding
characteristics for the product.
* See table below for Pollution Degree definitions
Environmental Requirements General characteristics
Temperature Operating condition: 0°C to 40°C
Storage condition: -40°C to 70°C
Maximum Relative Humidity
(non-condensing) Type tested, 95% RH up to 40°C, decreases linearly to 40% RH at 45°C
Altitude Operating condition: Up to 10,000 ft (3048m)
Storage condition: Up to 15,000 ft (4572m)
Pollution degree* Pollution Degree 2
Pollution Degree Description
1
No pollution or only dry, non-conductive pollution occurs. The pollution has no influence.
Example: A clean room or climate-controlled office environment.
2 Normally only dry non-conductive pollution occurs. Occasionally a temporary conductivity
caused by condensation may occur. Example: General indoor environment.
3 Conductive pollution occurs, or dry, non-conductive pollution occurs which becomes
conductive due to condensation which is expected. Example: Sheltered outdoor environment.