Keysight ixia UHD100T32, Руководство по началу работы

Страница: 22 / 48

C
HAPTER
2 Prerequisites
This section contains the prerequisites to configure and to get started with the UHD100T32 fixed
chassis.
Section contents:
Hardware requirements 9
Software requirements 9
Hardware requirements
You need a management workstation (such as a laptop) for a serial connection or a monitor and
keyboard to perform the initial system configuration.
For a serial connection, the workstation requires the following:
l
A 9-pin serial port or a USB-to-Serial converter
l
An RJ-45 100 M/1G/10G Ethernet port
l
Terminal emulation software that supports SSH and serial connections (we recommend you to use
PuTTY as an open source option). Configure the terminal software as follows:
n
Use UTF-8 character set with VT100 terminal (HyperTerminal, PuTTY, TeraTerm, or
equivalent)
n
Select the corresponding COM port number for your serial port (for example, COM1)
n
Speed: 9600
n
Data bits: 8
n
Stop bits: 1
n
Parity: None
n
Flow Control: None
Software requirements
The UHD web application uses the UHD100T32 fixed chassis traffic ports. This section outlines the
supported versions of these applications.
Support for UHD100T32 is provided in the following applications for the indicated software versions:
– 9 – 913-2626-01