Installation Note N9021-90004
9
Option EXM, External Mixing Upgrade Kit
Front Frame Assembly Removal
1.
Refer to
. Using the T-10 driver, remove the eight screws
(1)
(0515-1035), four on
each side, to detach the Front Frame Assembly from the chassis.
2.
Refer to
. Pull the Front Frame Assembly carefully away from the chassis. Remove the
ribbon cable W1 from the motherboard. The cable has locking tabs on each side, pinch and
pull to release.
Figure 4
Front Frame Removal
Make sure any connectors on the front panel are removed.
W1 may have locking springs on each side. Depress the spring on each side of the connector to
remove from the motherboard.