Keysight E8257D Option H1K, Инструкции по установке

Страница: 9 / 11

9
Install the A32 10 MHz Crystal Oscillator
Refer to Figure 3 .
1. Position the signal generator with the rear panel facing you.
2. Using a T-10 driver, install the three screws (1) to secure the A32 10 MHz Crystal Oscillator to the rear
panel.
3. Connect A32W1 bias cable to the A21 Rear Panel Interface Board, A21P2.
4. Using needle-nose pliers, connect W48 flexible cable from 10 MHz EFC (rear panel connector) to A32J1.
5. Using needle-nose pliers, connect W47 flexible cable from J1041 of the A31 Motherboard to A32J2.
Figure 3 A32 10 MHz Crystal Oscillator