Keysight E8257D Option H1K, Инструкции по установке

Страница: 10 / 11

10
Install the New A7 Reference Board
Refer to Figure 4 .
1. Position the signal generator with the front panel facing you.
2. Lift the retention levers and disconnect the A7 Reference board from the A31 Motherboard.
3. Lift the board out of the slot.
4. Install the new A7 Reference board into the empty slot.
Figure 4 A7 Reference
Verify Proper Installation of Option UNR
1. Press:
Utility
>
Instrument Info/Help Info
>
Options Info
.
2. Make sure Option UNR is listed.
NOTE If you enable an option that does not have the required hardware installed, the menus for
that option will be activated but the option cannot operate.
A7