7
Keysight Power Distribution Unit Installation Guide
E7685A PDU Installation Kit Contents
E7685A PDU Installation Kit Contents
The Keysight E7685A PDU Installation Kit contains the following:
Tools Required
To install the PDU kit, you will need the following tools:
-
T25 Torx® driver.
-
Wrench or nut driver to fit 3/8 inch hex nut.
PDU Kit Contents
The four KeysightKeysight PDU kits contain the following:
Item
Quantity
Description
Part Number
1
1
Forehead Assembly - with switch cutout
5061-8750
2
2
PDU Support Bracket
C2786-00021
3
4
Sheet Metal Nuts (10-32)
0590-0804
4
4
Machine Screw, Torx® T25
⎯
10-32x0.5inch
2680-0278
The installation of a first PDU requires the purchase of the Keysight E7685A
PDU Installation Kit. This kit provides hardware and rack components required
to complete the installation. The installation of a second PDU does not require
an additional kit. However, you will need the kit‘s switch and hardware if the
first PDU was not switched, and you are adding a switched PDU.
The voltage of a second PDU must match that of the installed PDU for correct
operation of the illuminated switch.
When the remote switch is not utilized, the plug is considered to be the
disconnect device. When the plug is the disconnect device the socket-outlet
shall be installed near the equipment and shall be readily accessible.
PDU Kit Number
Quantity
Description
1.3m Kit:
E4451-67000
E4453-67000
1.6m Kit:
E4455-67000
E4457-67000
1 PDU
1.3m PDU:
100-120V North American (NEMA receptacles)
200-240V International (IEC receptacles)
1.6m PDU:
100-120V North American (NEMA receptacles)
200-240V International (IEC receptacles)
