Operating and Service Guide 85059-90015 19
85059G 1.0 mm Connector Gage
Operation
Figure 4
85059G Connector Gage with Master Gage - Before and After Zeroing
Gages should be checked often, to make sure that the zero setting has not
changed. Generally, when the gage readout on a gage that has been recently
zeroed does not display zero, the gage or calibration block needs cleaning.
Using REV and Hold Modes
Use this section to exit REV or Hold modes on your 1.0 mm gage.
Gage before zeroing
Gage after zeroing
Press SET
button to
zero the
gage.
