10 Operating and Service Guide 85059-90015
85059G 1.0 mm Connector Gage
Installation
-
Installation
Initial Inspection
Inspect the shipping container for damage. If the shipping container or
packaging material is damaged, it should be kept until the contents of the
shipment have been checked. If there is mechanical damage or if the gages do
not pass the performance tests, notify the nearest Keysight Technologies
office. Keep the damaged shipping materials (if any) for inspection by the
carrier and a Keysight representative.
Storage and Shipment Environment
The gage kit should be stored in a clean, dry environment. The following
limitations apply to both storage and shipment.
.
Original Packaging
Containers and materials identical to those used in factory packaging are
available through Keysight Technologies offices. If the gage kit is being
returned to Keysight for calibration or service, attach a tag indicating the type
of service required, return address, model number, and serial number. Also,
mark the container FRAGILE to assure careful handling. In any
correspondence, refer to the instrument by model number and serial number
Temperature
–10 to 60 °C
Relative Humidity
less than 95% at 40°C
Altitude
less than 15.3 km (50,000 ft)
