Keysight 8478B Скачать руководство пользователя страница 4

Страница: 4 / 49

4 Keysight 8478B Thermistor Mount

Certification
Limitation of Warranty

Limitation of Warranty

The foregoing warranty shall not apply to defects resulting from improper or

inadequate maintenance by the Buyer, Buyer-supplied products or interfacing,

unauthorized modification or misuse, operation outside of the environmental

specifications for the product, or improper site preparation or maintenance.
The design and implementation of any circuit on this product is the sole

responsibility of the Buyer. Keysight does not warrant the Buyer’s circuitry or

malfunctions of Keysight products that result from the Buyer’s circuitry. In

addition, Keysight does not warrant any damage that occurs as a result of the

Buyer’s circuit or any defects that result from Buyer-supplied products.
To the extent allowed by local law, Keysight makes no other warranty,

expressed or implied, whether written or oral with respect to this product and

specifically disclaims any implied warranty or condition of merchantability,

fitness for a particular purpose, or satisfactory quality.

Exclusive Remedies

To the extent allowed by local law, the remedies provided herein are the

Buyer’s sole and exclusive remedies. Keysight shall not be liable for any direct,

indirect, special, incidental, or consequential damages (including lost profit or

data), whether based on warranty, contract, tort, or any other legal theory.

Содержание 8478B


















































Результаты поиска

Содержание 8478B

Отзывы:

Похожие инструкции для 8478B

Бренды по названию

Популярные бренды

Keysight 8478B, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 8478B

Отзывы:

Похожие инструкции для 8478B

Бренды по названию

Популярные бренды