16
External Boot Drive for Keysight Logic Analysis Systems Installation Guide
1
Installation on 16900 Series Logic Analysis Systems
Step 3. Remove the CPU tray
16900A and 16902A CPU tray
1 Disconnect cables from the module interface board.
2 Remove 7 screws from the back of the CPU tray using a Torx T10
screwdriver.
CAUTION
Before removing the CPU tray (after the cover is removed), attach a
grounding wrist strap to the chassis.
CAUTION
Do not loosen the other screws on the rear sheet metal; they position the
rear sheet metal with respect to the CPU motherboard, and this position
should not shifted. Doing so can make it difficult to make a reliable
connection between the PCI cards and the CPU motherboard.