1
Keysight ZA0060A Quick Start Guide
42
NOTE
– During the BLE Device Discovery test step, the tester will try to establish a
connection with the DUT to verify if it supports connections. Some of the BLE
devices (connectable peripheral) will stop advertising for a period of time
after it is disconnected from the master/tester, or do not allow subsequence
connections made continuously mainly for security purpose (avoid device
hacking).
– If the BLE Active Scan PER measurement results (in %) are not repeatable, try
to increase the Packet Count and/or Scan Delay. The default 10 packets may
be insufficient for accurate PER measurements. You can adjust Packet Count
in the Active Scan test step.