Keysight Technologies U3047AE04, Руководство пользователя и сервисное руководство

Страница: 9 / 81

User’s and Service Guide U3047-90002 3
U3047AE04 Description
Description
The Keysight U3047AE04 is a Multiport Test Set extension designed for use with the
N5247A 4-Port PNA-X (10 MHz to 70 GHz) to provide a full 8-Port measurement solution.
The U3047AE04 has the following key features:
•
4 Test Ports (1.85 mm male connectors)
•
Solid-State switching
•
10 MHz to 70 GHz frequency range of operation
•
Keysight PNA compatibility with rear panel Test Set I/O interface for operational control. An
external personal computer is not required. The N5247A Option 400 and 551 are required.
•
A standard Keysight System II instrument cabinet (4EIA high by 497.8 mm deep).
The N5247A PNA-X will be referred to throughout this document as the
PNA-X. The U3047AE04 will be referred to as the Test Set.
Network Analyzer Requirements
All network analyzers require Option 551 for multiport operation (N-Port error correction
and measurement capability).
Table 1 below provides a listing of other network analyzer
option requirements. The analyzer's frequency range must be equal to or exceed that of the
test set so that the measurement system covers the full frequency range of the test set.
The test set files indicated in Table 1 must be installed into the analyzer's file directory:
c:\Program Files\Agilent\Network Analyzer\testsets
•
Documentation - http://www.keysight.com/find/pna
•
Network Analyzer Firmware - http://na. support .keysight.com/pna/firmware
•
U3047AE04 Test Set Files - http://na. support .keysight.com/multiport (see test set files)
Table 1 Network Analyzer Configuration Requirements
4-Port Network Analyzer Options
N5247A PNA-X or
N5227A PNA
4 0 0 , 551
Test Set File
System Figure
u3047ae04_pnax_p4.tsx Figure 1 on Page 2
Verifying the Shipment
To verify the contents shipped with your product, refer to the “Box Content List” included with
the shipment.
Inspect the shipping container. If the container or packing material is damaged, it should be
kept until the contents of the shipment have been checked mechanically and electrically. If there
is physical damage refer to
“Contacting Keysight” on page 74
. Keep the damaged shipping
materials (if any) for inspection by the carrier and an Keysight Technologies representative.