Keysight Technologies S9106AC-2IF, Руководство для стартапов

Страница: 43 / 80

4 Install Hardware
S9106AC-2IF, -4UP, and -42D 5G FR1 Multi-port Transceiver Solutions, Startup Guide 39
4 Install Hardware
Before installing hardware, Review Safety
Requirements on page 3 .
4. 1 Standard Configurations
The S9106AC is available in three standard configurations:
Keysight S9106AC-2IF 5G FR1 Multi-port Transceiver on page 41
includes:
one S9106AC Base System (PXIe chassis and
two M9410A PXIe VXT Vector Transceivers)
one E7770A Common Interface Unit (CIU) with
two E7770A-HB2 CIU Channel Cards, 7 to 15 GHz High IF
one E7770A-LA2 CIU LO Card
one E7770A-LD2 CIU LO Distribution Card
The S9106AC-2IF, two-channel configuration, consists of
two transceivers providing two RF Tx channels or two RF Rx channels,
or two High IF Tx channels or two High IF Rx channels
operating in one frequency range at a time:
FR1 RF frequencies ranging from 380 MHz to 6 GHz
or High IF frequencies from 7 to 15 GHz
This system can be configured for 2x2 MIMO measurements
in the FR1 RF frequency range, or 2x2 MIMO measurements
in the High IF frequency range.
Keysight S9106AC-4UP 5G FR1 Multi-port Transceiver on page 45
includes:
one S9106AC Base System (PXIe chassis and
four M9410A PXIe VXT Vector Transceivers)
The S9106AC-4UP, four-channel configuration, consists of
four transceivers providing four Tx channels or four Rx channels.
All four channels can operate in the FR1 RF frequency range.
FR1 RF frequencies ranging from 380 MHz to 6 GHz
This system can be configured for 2x2 or 4x4 MIMO measurements
in the FR1 RF frequency range.