Keysight Technologies P939 A Series Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 54

background image

This is a

S

afety Protection Class I Product (provided with a protective

earthing ground incorporated in the power cord). The mains plug shall
only be inserted in a socket outlet provided with a protective earth
contact. Any interruption of the protective conductor inside or outside
of the product is likely to make the product dangerous. Intentional
interruption is prohibited.

To prevent electrical shock, disconnect the Keysight Technologies
Model P9390A from mains before cleaning. Use a dry cloth or one
slightly dampened with water to clean the external case parts. Do not
attempt to clean internally.

No operator serviceable parts inside. Refer servicing to qualified
personnel. To prevent electrical shock, do not remove covers.

If this product is not used as specified, the protection provided by the
equipment could be impaired. This product must be used in a normal
condition (in which all means for protection are intact) only.

Cleaning connectors with alcohol shall only be done with the instruments
power cord removed, and in a well-ventilated area. Allow all residual
alcohol moisture to evaporate and the fumes to dissipate prior to
energizing the instrument.

This product is designed for use in Installation Category II and Pollution
Degree 2.

Install the instrument so that the detachable power cord is readily
identifiable and is easily reached by the operator. The detachable
power cord is the instrument disconnecting device. It disconnects the
mains circuits from the mains supply before other parts of the
instrument. The front panel switch is only a standby switch and is not a
LINE switch. Alternatively, an externally installed switch or circuit
breaker (which is readily identifiable and is easily reached by the
operator) may be used as a disconnecting device.

The safety of any system incorporating the equipment is the
responsibility of the assembler of the system.

Use Keysight supplied power adapter with the supplied power

.

Use a Keysight supplied power cord or one with the same or better
electrical rating.

48

Keysight P939xA Streamline Customs User's Guide

«
...
46
47
48
49
50
...
»

Содержание P939 A Series























































Отзывы:

Нет отзывов

Похожие инструкции для P939 A Series

Бренд: Oldham Страницы: 43

Бренд: 3B6 Страницы: 30

Бренд: WAGER Страницы: 36

Бренд: Hammond Страницы: 130

Бренд: Hammond Organ Страницы: 25

Бренд: Hammond Organ Страницы: 87

Бренд: OBD Страницы: 5

Signet FlowtraMag 2580 Series

Бренд: GF Страницы: 20

Бренд: Ocea Soft Страницы: 19

Бренд: janitza Страницы: 85

Бренд: Teledyne Lecroy Страницы: 4

Бренд: Interacoustics Страницы: 54

Бренд: PCB Piezotronics Страницы: 10

Бренд: Sonel Страницы: 84

Бренд: FM Marin Страницы: 8

Thermo Scientific iCE 3000 Series

Бренд: ThermoFisher Scientific Страницы: 42

Бренд: SEFRAM Страницы: 31

WTW pH/ION 3310

Бренд: Xylem Страницы: 48

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды