17
Quick Start Guide
Remote Control
Installing Keysight IO Libraries suite
Before trying to remotely control your N9310A, you need to
install
Keysight IO Libraries suite
on your PC. The Keysight IO
Libraries Suite is a general purpose instrument driver for all
Keysight test and measurement instruments. This software is
in the documentation CD with the shipment, or download a
latest version from
http://www.keysight.com/find/iolib
Follow the windows wizard to finish the installation. Then,
you have successfully set up an environment for remotely
control your N9310A.
Connecting your N9310A to a Controller
1
Switch on your N9310A. The orange standby LED on the
front panel is turned off and the green LED is turned on.
2
Refer to the following Figure for your PC to instrument
connection.
Figure 5
USB cable connection for remote control
Then the signal generator is available for your remotely
control. Any further information on programming please
refer to
User’s Guide
.
Connecting
PC
Connecting
Device
