Installation Note N5245-90012 9
Items Included in the Upgrade Kit
-
Machine screw, M4.0 x 10, pan head (2 to attach source 2 to chassis; 2
to attach A12 doubler 3 to chassis; 2 to attach A13 doubler 4 to chassis)
6
0515-0380
-
Machine screw, M3.0 x 8, pan head (3 to attach shield to mixer brick; 8
to attach 2 src attn and 2 rcvr attn to brackets; 4 to attach 2 bias tee
brackets to chassis; 1 to attach cable bracket to deck)
16
0515-0372
-
Machine screw, M2.5 x 16, pan head (to attach splitter to mixer brick)
2
0515-2007
-
Machine screw, M3.0 x 6, pan head (4 to attach 2 receiver
attenuator/bracket assy. to deck; 4 to attach 2 source
attenuator/bracket assy to deck)
8
0515-0430
-
Machine screw, M3.0 x 10, pan head (4 to attach 2 reference
coupler/bracket assemblies to deck)
4
0515-0374
-
Machine screw, M3.0 x 14, pan head (to attach 2 bias tees to brackets)
4
0515-2994
-
Front panel overlay (label), 4-port
1
N5242-80003
-
Nameplate, N5245A
1
N5245-80003
-
Nameplate, N5244A
1
N5244-80001
-
Gap pad (between each coupler and test set front sub panel)
4
E4403-20033
-
Gap pad (between mixer brick A28 and shield)
4
N5245-20125
-
Power button overlay (label)
1
N5242-80007
-
50 ohm load, attached to W58 (N5245-20095)
1
1810-0118
-
Vibration mount (between couplers 1 & 3, and 2 & 4)
2
0460-2725
-
Mounting nuts (for port 3 & 4 test port couplers)
2
5022-1087
-
Cable guard, center jumper cables
1
N5242-00030
-
Cable tie wrap, 1 to secure W21 (N5245-20008) to side of deck
5
1400-0249
-
Cable clamp, 1 to secure W25 (N5245-20116) to deck
5
1400-1334
-
Bracket
for bias tee
2
N5245-00011
-
Bracket
for reference coupler
2
N5245-00017
-
Bracket
for cables
1
N5245-00022
-
Bracket for source attenuator and receiver attenuator
4
N5245-00015
-
Dust caps for test ports
4
1401-0214
W2
A10 (source 2) P1 to A17 13.5 GHz source (2) synthesizer J1207
1
N5245-20100
W7
A10 (source 2) P5 to A12 port 3 doubler
1
N5245-20034
Table 1
Contents of Upgrade Kit N5245-60106
Ref
Desig.
Description
Qty
Part Number
