manualshive.com logo in svg

Keysight Technologies N5221BU-665, Руководство пользователя, Страница: 77 / 84

Поделиться
Скачать
Keysight Technologies N5221BU-665 Скачать руководство пользователя страница 77

Installation Note N5222-90128                                                                                                                                  77

Installation Procedure for the Upgrade

Step 50. Remove Option 205 License

Procedure Requirements

— The analyzer must be powered up and operating to perform this procedure.
— The Network Analyzer program must 

not

 be running.

— A keyboard and mouse must be connected to the network analyzer.

Option 205 License Removal Procedure

1.

To start the Keysight License Manager, press 

Start

 > 

Keysight License 

Manager

 >

 Keysight License Manager

 . A Keysight License Manager dialog 

box will appear.

2.

Right click the on the desired option and click 

Delete

.

3.

In the Keysight License Manager dialog box that appears, press or click 

Yes

 to confirm delete.

4.

A message displays stating that the option removal was successful.

Содержание N5221BU-665





















































































Отзывы:

Нет отзывов