Keysight Technologies N5221BU-4S7, Руководство пользователя

Страница: 7 / 46

Installation Note N5222-90133 7
Description of this Upgrade
Tools Required for the Installation
Tools Required for the Installation
About Installing the Upgrade
Description Qty
T-10 TORX driver - set to 9 in-lbs (1.02 N.m) 1
T-20 TORX driver - set to 21 in-lbs (2.38 N.m) 1
5/16-in (8 mm) nutsetter or open end torque wrench - set to 10 in-lbs (1.13 N.m) 1
5/16-in (8 mm) nutsetter or open end torque wrench - set to 21 in-lbs (2.38 N.m) 1
5/16-in (8 mm) nutsetter or open end torque wrench- set to 8 in-lbs (0.9 N.m) 1
5/8-in (16 mm) nutsetter or open end torque wrench - set to 21 in-lbs (2.38 N.m) 1
Needle nose pliers 1
Flat head screwdriver 1
Use a 5/16-in torque wrench set to 10 in-lbs on all cable connections
except the front and rear panel bulkhead connectors. On these, use a
9 mm nutsetter or open end torque wrench set to 21 in-lb.
Products affected All N5221/2B, N5241/2/9B 4-port microwave network analyzers
Installation to be performed by Keysight service center, personnel qualified by Keysight, or
customer
Estimated installation time 4 hours
Estimated adjustment time 3 hours
Estimated full instrument calibration time 4.5 hours