Keysight Technologies N4917CPCA Скачать руководство пользователя страница 52

Страница: 52 / 84

Keysight N4917CPCA Optical Receiver Stress Test for CPRI Fronthaul Networks User Guide

Using the N4917CPCA Software

for both PJ2/RJ and BUJ. In the default files, the bit rate is set to the CPRI

line rate, and the DCA reference receiver bandwidth is set to 75% of the bit

rate.

PJ2/BUJ

or RJ/BUJ

: The dominant driving parameter for J2 is the BERT

PJ2, RJ, or BUJ amplitude. The choice can be made by loading a

parameter file or can also be chosen in the N4917CPCA GUI.

Bit Rate

: The N4917CPCA can calibrate a stressed eye at either the

IEEE802.3 standard rates or the CPRI rates e.g. for 100GBASE standards

25.78125 or 24.33024 Gb/s, for 10/40GBASE standards 10.3125, 10.1376

or 9.8304 Gb/s. This choice can be made in the parameter file or from a bit

rate selection in the N4917CPCA GUI.

DCA Reference Receiver Bandwidth

: IEEE 802.3 10/40/100GBASE

sections define the DCA reference receiver bandwidth to be 75% of the bit

rate e.g. 19.34 GHz BW for 25.78125 Gb/s data rate and 7.465 GHz BW

for 10.3215 Gb/s date rate. This is achieved by using either hardware

filters or the SIRC function in the DCA, so that the DCA has the same

bandwidth as a compliant DUT when calibrating the stressed eye

parameters.

When using IEEE 802.3 compliant devices in a CPRI fronthaul network

application, even though the bit rate is different, the DUT receiver

bandwidth should not change. To accommodate this, the DCA Ref Rcvr

BW is user- adjustable. If Ref Rcvr BW Coupling is set to ON then the DCA

receiver bandwidth will be set to 75 % of the bit rate, e.g., 19.34 GHz for

25.78125 Gb/s or 18.25 GHz for 24.33024 Gb/s. If Ref Rcvr BW Coupling is

set to OFF, then initially, the value from the last loaded parameter file will

be used, and the user can edit this value in the N4917CPCA GUI prior to

starting a stressed eye calibration.

The default and the recommendation is Ref Rcvr BW Coupling = OFF, i.e.,

BW is always 75 % of the IEEE 802.3 data rates.

Содержание N4917CPCA





















































































Результаты поиска

Содержание N4917CPCA

Отзывы:

Похожие инструкции для N4917CPCA

Бренды по названию

Популярные бренды

Keysight Technologies N4917CPCA, Руководство пользователя

Результаты поиска

Содержание N4917CPCA

Отзывы:

Похожие инструкции для N4917CPCA

Бренды по названию

Популярные бренды