Connecting the N1913PM5B
1.
Ensuring ESD precautions, unpack and remove the products from their
packaging. Keep all connector covers to reinstall after use
.
2.
Connect the sensor head cable on the front panel, the 9 Vdc power supply, and (if
using software) the USB cable to the rear panel on the PM5B power meter. See
Figure 1 and Figure 2 below.
Figure 1
N1913PM5B with Sensor and Cable Connected to the Front Panel
Figure
2
N1913PM5B with Power Supply and USB Cable Connected to the Rear Panel
The
USB connection is usually very snug and may require some additional
pressure to insert
or remove
completely
.
6
Keysight N1913PM5B Product Note
