Keysight Technologies M9038A, Руководство для стартапов

Страница: 3 / 32

iii
Notices
© Keysight Technologies, Inc. 2022
No part of this manual may be repro -
duced in any form or by any means
(including electronic storage and retrieval
or translation into a foreign language)
without prior agreement and written con -
sent from Keysight Technologies, Inc. as
governed by United States and interna -
tional copyright laws.
Manual Part Number
M9038-90001
Edition
First Edition, July 2022
Published in USA
Keysight Technologies, Inc.
1400 Fountaingrove Parkway
Santa Rosa, CA 95403 USA
Trademarks
AXIe is a registered trademark of the AXIe
Consortium.
PXI is a registered trademark of the PXI
Systems Alliance.
PICMG
®
, Compact PCI
®
, and
AdvancedTCA
®
are registered trade -
marks of the PCI Industrial Computer
Manufacturers Group.
PCI-SIG
®
, PCI Express
®
, and PCIe
®
are
registered trademarks of PCI-SIG.
Sales and Technical Support
To contact Keysight for sales and techni -
cal support, refer to the support links on
the following Keysight websites:
www.keysight.com/find/M9038A (prod -
uct-specific information and support,
software and documentation updates)
www.keysight.com/find/assist (world -
wide contact information for repair and
service)
Declaration of Conformity
Declarations of Conformity for this prod -
uct and for other Keysight products may
be downloaded from the Web. Go to
http://www.keysight.com/go/conformity
and click on “Declarations of Conformity.”
You can then search by product number
to find the latest Declaration of Confor -
mity.
T
echnology Licenses
The hardware and/or software described
in this document are furnished under a
license and may be used or copied only in
accordance with the terms of such
license.
Warranty
THE MATERIAL CONTAINED IN THIS
DOCUMENT IS PROVIDED “AS IS,” AND
IS SUBJECT TO BEING CHANGED,
WITHOUT NOTICE, IN FUTURE EDI -
TIONS. FURTHER, TO THE MAXIMUM
EXTENT PERMITTED BY APPLICABLE
LAW, KEYSIGHT DISCLAIMS ALL WAR -
RANTIES, EITHER EXPRESS OR IMPLIED,
WITH REGARD TO THIS MANUAL AND
ANY INFORMATION CONTAINED
HEREIN, INCLUDING BUT NOT LIMITED
TO THE IMPLIED WARRANTIES OF MER -
CHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. KEYSIGHT
SHALL NOT BE LIABLE FOR ERRORS OR
FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES IN CONNECTION WITH THE
FURNISHING, USE, OR PERFORMANCE
OF THIS DOCUMENT OR OF ANY INFOR -
MATION CONTAINED HEREIN. SHOULD
KEYSIGHT AND THE USER HAVE A SEP -
ARATE WRITTEN AGREEMENT WITH
WARRANTY TERMS COVERING THE
MATERIAL IN THIS DOCUMENT THAT
CONFLICT WITH THESE TERMS, THE
WARRANTY TERMS IN THE SEPARATE
AGREEMENT SHALL CONTROL.
Keysight Technologies does not warrant
third-party system-level (combination of
chassis, controllers, modules, etc.) per -
formance, safety, or regulatory compli -
ance unless specifically stated.
DFARS/Restricted Rights
Notices
If software is for use in the performance
of a U.S. Government prime contract or
subcontract, Software is delivered and
licensed as “Commercial computer soft -
ware” as defined in DFAR 252.227-7014
(June 1995), or as a “commercial item” as
defined in FAR 2.101(a) or as “Restricted
computer software” as defined in FAR
52.227-19 (June 1987) or any equivalent
agency regulation or contract clause.
Use, duplication or disclosure of Software
is subject to Keysight Technologies’ stan -
dard commercial license terms, and non-
DOD Departments and Agencies of the
U.S. Government will receive no greater
than Restricted Rights as defined in FAR
52.227-19(c)(1-2) (June 1987). U.S. Gov -
ernment users will receive no greater
than Limited Rights as defined in FAR
52.227-14 (June 1987) or DFAR 252.227-
7015 (b)(2) (November 1995), as applica -
ble in any technical data.