Keysight Technologies M9038A, Руководство для стартапов

Страница: 15 / 32

Keysight M9038A PXIe Embedded Controller Startup Guide 15
Step 3: Install the M9038A Embedded Controller
Step 3: Install the M9038A Embedded Controller
The Keysight M9038A has been designed for easy installation. However, the
following standard precautions, installation procedures, and general information
must be observed to ensure proper installation and to prevent damage to the
board, other system components, or injury to personnel.
Keysight’s M9038A can operate with all of the PCIe fabric configurations found
on a Keysight PXIe chassis as well as the standard 4x4 fabric used on
non-Keysight PXIe chassis.
The following safety precautions must be observed when installing or
operating the Keysight M9038A. Exercise care when handling the module
as the heat sink can get very hot. Do not touch the heat sink when
installing or removing the module. The board should not be placed on any
surface or in any form of storage container until the board and heat sink
have cooled to room temperature.
Embedded controllers, such as the M9038A, can only be installed
in System Controller slot (Slot 1) of the chassis.