7
Measure S-Parameters (NA Mode)
continued
The following NA Mode settings can be made before or
after calibrating without affecting measurement
accuracy.
Press
Scale/Amptd
to change scale.
Autoscale
Adjusts the Y-axis to comfortably fit
the Min and Max amplitude of the active trace.
Autoscale All
Autoscales all of the traces on
the screen. Useful for multi-trace configurations.
Scale
Manually enter a scale per division to view
specific areas of the trace.
Ref Level
Manually set the value of the
reference line.
Ref Position
Manually set the position of the
reference line. Values must be between 0 (TOP
line) and 10 (BOTTOM line)
Press
Measure 1
then
Format
to change the
format for the measurement.
Press
BW 2
then
Averaqe
then enter a value for
the number of trace sweeps to average.
Press
Marker
then enter a value to move the marker
to the X-axis position of interest.
Press
Limit 8
then
Edit
or
Recall Limits
to test
measurement results against limit lines.
