Keysight Technologies E6960A 1000Base-T1 Скачать руководство пользователя страница 2

Страница: 2 / 73

Keysight E6960A User Guide and Method of Implementation

Notices

duced in any form or by any means

(including electronic storage and

retrieval or translation into a foreign

language) without prior agreement and

written consent from Keysight Technol-

ogies as governed by United States and

international copyright laws.

Trademarks

[Relevant acknowledgements should

be included here. Reference “LA-403

When to Use the Trademark Symbol

and Other Trademark Acknowledge-

ments” for guidance. If no acknowl-

edgements are required, remove the

caption.]

Manual Part Number

E6960-90001

Edition

Edition 3.0, March 2019

Printed in:

Printed in Malaysia

Published by:

Keysight Technologies

Bayan Lepas Free Industrial Zone,

11900 Penang, Malaysia

Technology Licenses

The hardware and/or software

described in this document are fur-

nished under a license and may be

used or copied only in accordance with

the terms of such license.

Declaration of Conformity

Declarations of Conformity for this

product and for other Keysight prod-

ucts may be downloaded from the

Web. Go to

http://www.keysight.com/

go/conformity

. You can then search by

product number to find the latest Dec-

laration of Conformity.

U.S. Government Rights

The Software is “commercial computer

software,” as defined by Federal Acqui-

sition Regulation (“FAR”) 2.101. Pursu-

ant to FAR 12.212 and 27.405-3 and

Department of Defense FAR Supple-

ment (“DFARS”) 227.7202, the U.S.

government acquires commercial com-

puter software under the same terms

by which the software is customarily

provided to the public. Accordingly,

Keysight provides the Software to U.S.

government customers under its stan-

dard commercial license, which is

embodied in its End User License

Agreement (EULA), a copy of which can

be found at

http://www.keysight.com/

find/sweula

. The license set forth in the

EULA represents the exclusive authority

by which the U.S. government may use,

modify, distribute, or disclose the Soft-

ware. The EULA and the license set

forth therein, does not require or per-

mit, among other things, that Keysight:

(1) Furnish technical information

related to commercial computer soft-

ware or commercial computer software

documentation that is not customarily

provided to the public; or (2) Relinquish

to, or otherwise provide, the govern-

ment rights in excess of these rights

customarily provided to the public to

use, modify, reproduce, release, per-

form, display, or disclose commercial

computer software or commercial com-

puter software documentation. No

additional government requirements

beyond those set forth in the EULA

shall apply, except to the extent that

those terms, rights, or licenses are

explicitly required from all providers of

commercial computer software pursu-

ant to the FAR and the DFARS and are

set forth specifically in writing else-

where in the EULA. Keysight shall be

under no obligation to update, revise or

otherwise modify the Software. With

respect to any technical data as

defined by FAR 2.101, pursuant to FAR

12.211 and 27.404.2 and DFARS

227.7102, the U.S. government

acquires no greater than Limited Rights

as defined in FAR 27.401 or DFAR

227.7103-5 (c), as applicable in any

technical data.

Warranty

THE MATERIAL CONTAINED IN THIS

DOCUMENT IS PROVIDED “AS IS,”

AND IS SUBJECT TO BEING

CHANGED, WITHOUT NOTICE, IN

FUTURE EDITIONS. FURTHER, TO THE

MAXIMUM EXTENT PERMITTED BY

APPLICABLE LAW, KEYSIGHT DIS-

CLAIMS ALL WARRANTIES, EITHER

EXPRESS OR IMPLIED, WITH REGARD

TO THIS MANUAL AND ANY INFORMA-

TION CONTAINED HEREIN, INCLUD-

ING BUT NOT LIMITED TO THE

IMPLIED WARRANTIES OF MER-

CHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. KEYSIGHT

SHALL NOT BE LIABLE FOR ERRORS

OR FOR INCIDENTAL OR CONSE-

QUENTIAL DAMAGES IN CONNECTION

WITH THE FURNISHING, USE, OR

PERFORMANCE OF THIS DOCUMENT

OR OF ANY INFORMATION CON-

TAINED HEREIN. SHOULD KEYSIGHT

AND THE USER HAVE A SEPARATE

WRITTEN AGREEMENT WITH WAR-

RANTY TERMS COVERING THE MATE-

RIAL IN THIS DOCUMENT THAT

CONFLICT WITH THESE TERMS, THE

WARRANTY TERMS IN THE SEPARATE

AGREEMENT SHALL CONTROL.

Safety Information

CAUTION

A CAUTION notice denotes a hazard. It

calls attention to an operating proce-

dure, practice, or the like that, if not

correctly performed or adhered to,

could result in damage to the product

or loss of important data. Do not pro-

ceed beyond a CAUTION notice until

the indicated conditions are fully

understood and met.

WARNING

A WARNING notice denotes a hazard. It

calls attention to an operating proce-

dure, practice, or the like that, if not

correctly performed or adhered to,

could result in personal injury or death.

Do not proceed beyond a WARNING

notice until the indicated conditions are

fully understood and met.

Содержание E6960A 1000Base-T1










































































Результаты поиска

Содержание E6960A 1000Base-T1

Отзывы:

Похожие инструкции для E6960A 1000Base-T1

Бренды по названию

Популярные бренды

Keysight Technologies E6960A 1000Base-T1, Руководство пользователя и методика внедрения

Результаты поиска

Содержание E6960A 1000Base-T1

Отзывы:

Похожие инструкции для E6960A 1000Base-T1

Бренды по названию

Популярные бренды