Keysight Technologies E5053A, Руководство пользователя

Страница: 9 / 37

9
Keysight E5053A Microwave Downconverter
User’s Guide
1 Installation
This chapter provides information on how to set up the Keysight E5053A
microwave downconverter.
Incoming inspection
When you receive the product, follow the steps below to perform the incoming
inspection.
Step 1. Check the shipping container and cushioning material for damage.
Step 2. Check the contents of the package for mechanical damage or defects.
Step 3. Check the contents of the shipment using Table 1-1 and Figure 1-1 to see if
all your specified options are complete.
Step 4. If you detect any of the following in the inspection, contact you nearest
Keysight Technologies sales office.
1. If the shipping container or cushioning material is damaged or the
cushioning material shows signs of unusual stress.
2. If you find any mechanical damage or defect to the contents.
3. If the contents of the shipment are not complete.
4. If you find any fault with the product during operational checks described
below.
If there are signs of shipping damage to any portion of the outer enclosure
when opening the package (for example, the cover, front/rear panel, power
switch, and port connectors), do not turn on the power. You may get an
electrical shock.
If the shipping container or cushioning material is damaged, it should be
kept until all the other inspections have been done.