Keysight Technologies E5053A, Руководство пользователя

Страница: 24 / 37

24 Keysight E5053A Microwave Downconverter
Overview of Product
Names and Functions of Parts
2-
Rear Panel
The names and functions of the parts on the rear panel of the E5053A are
described below.
Figure 2-2 Rear Panel
1. USB (USBTMC) interface port
Connect to the USB port on the rear panel of the E5052B signal source
analyzer with the USB cable.
Connector type: Universal serial bus jack, B type (four contacts); female
2. External reference signal input connector channel 1/channel 2 (Ref
In)
A reference signal input connector in order to phase-lock the E5053A
measurement signal with an external frequency reference signal. Supplying a
reference signal to this connector improves the accuracy and stability of the
E5053A’s measurement signal frequency.
Connection on of devices other than the E5052B signal source analyzer to
the USB port is not supported.
Channel 1: Connect to the 10 MHz Ref Out connector of the
E5052B with a BNC cable.
Channel 2: Connect to the Channel 1 Ref Out of the E5053A with a
BNC cable.