PRODUCT MARKINGS:
This symbol indicates the instrument is
sensitive to electrostatic discharge (ESD).
ESD can damage the highly sensitive
components in your instrument. ESD
damage is most likely to occur as the
module is being installed or when cables
are connected or disconnected. Protect
the circuits from ESD damage by wear-
ing a grounding strap that provides a high
resistance path to ground. Alternatively,
ground yourself to discharge any built-
up static charge by touching the outer
shell of any grounded instrument chassis
before touching the port connectors.
The CE mark is a registered trademark of
the European Community.
This symbol indicates product compliance
with the Canadian Interference-Causing
Equipment Standard (ICES-001). It also
identifies the product is an Industrial
Scientific and Medical Group 1 Class A
product (CISPR 11, Clause 4).
To prevent electrical shock, disconnect
the Keysight Technologies instrument from
mains before cleaning. Use a dry cloth or
one slightly dampened with water to clean
the external case parts. Do not attempt to
clean internally. To clean the connectors,
use alcohol in a well-ventilated area. Allow
all residual alcohol moisture to evaporate,
and the fumes to dissipate prior to energiz-
ing the instrument.
This symbol represents the South Korean
Class A EMC Declaration. This equipment
is Class A suitable for professional use and
is for use in electromagnetic environments
outside of the home.
Australian Communication and Media
Authority mark to indicate regulatory com-
pliance as a registered supplier.
This symbol indicates the time period dur-
ing which no hazardous or toxic substance
elements are expected to leak or deterio-
rate during normal use. Forty years is the
expected useful life of the product.
This symbol on an instrument means
caution risk of danger. You should refer to
the operating instructions located in the
user documentation in all cases where the
symbol is marked on the instrument.
This symbol indicates separate collection
for electrical and electronic equipment,
mandated under EU law as of August 13,
2005. All electric and electronic equipment
are required to be separated from normal
waste for disposal (Reference WEEE Direc-
tive, 2002/96/EC).
No operator serviceable parts inside. Refer
servicing to qualified personnel. To prevent
electrical shock do not remove covers. For
continued protection against fire hazard,
replace fuse with same type and rating.
WARNING
CLEANING PRECAUTIONS:
WARNING
A 급 기기 ( 업무용 방송통신기자재 )
이 기기는 업무용 (A 급 ) 전자파적합
기기로서 판 매자 또는 사용자는 이 점
을 주 의하시기 바라 며 , 가정외의 지역
에서 사용하는 것을 목적으 로 합니다.
