Keysight Technologies 85059V, Руководство по эксплуатации и обслуживанию

Страница: 13 / 54

Keysight 85059V Operation and Service Guide 2-3
Specifications
Mechanical Characteristics
Mechanical Characteristics
Mechanical characteristics such as center conductor protrusion and pin depth
are not warranted performance specifications. They are, however, important
supplemental characteristics related to electrical performance. Keysight
Technologies verifies the mechanical characteristics of the devices in this kit
with special gaging processes and electrical testing. This ensures that the
device connectors do not exhibit any improper pin depth when the kit leaves
the factory.
Refer to Table 2-2 on page 2-3 for allowable recession.
Pin Depth
Pin depth is the distance the center conductor mating plane differs from being
flush with the outer conductor mating plane. See Figure 2-1 . The pin depth of
a connector can be in one of two conditions:
— Protrusion is the condition in which the center conductor extends beyond
the outer conductor mating plane.
— Recession is the condition in which the center conductor is set back from
the outer conductor mating plane.
Table 2-2 Mismatch/Match Adapter Typical Mechanical Characteristics
Characteristic Typical Value
Inside Diameter of Outer Conductor 1.000 ± 0.005 mm
Outside Diameter of Center Conductor 0.434 ± 0.003 mm
Offset Length Nominal ± 0.008 mm
Pin Depth 0.004 (recessed) to 0.024 mm (maximum recession)