[
ASSEMBLY
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
STEP 2
STEP 3
Connect Lower Cross Frame (4) and Upper Cross Frame (5)
to Left and Right Rear Supports from STEP 1 using Bolts (13),
Washers (11) and Nylon Lock Nuts (12).
NOTE: T
WO PEOPLE
WILL BE NEEDED TO SAFELY COMPLETE THIS STEP
.
Connect Gun Racks (9) to the outside of both Front Supports
(8) using Bolts (14), Washers (16) and Nylon Lock Nuts (17).
Left and Right Safety Bars (6,7) should be set at desirable
height in order to catch straight bar at lowest position if need-
ed.
