Keylite KL/RX2, Руководство пользователя

Страница: 4 / 8

KL/RX2
Master Control Panel
REMOTE CONTROL
1) LED does not come on when a button is pressed.
- Ensure that the slide switch is in the on position.
- Replace the battery.
KL/RX2 MASTER CONTROL PANEL
1) Receive LED does not come on when a button is pressed on the remote control.
- Ensure that there is a 24V DC supply to the control panel.
- Ensure that the remote control is programmed to the control panel by following the
instructions on the previous page.
- Check the aerial connection for signs of damage.
2) The window closes with button 1.
- The wires on connections W+ and W- need to be reversed.
3) The blind closes with button 2.
- The wires on connections B+ and B- need to be reversed.
4) The rain sensor opens the window
- The wires on connections W+ and W- need to be reversed.
5) The rain sensor does not operate
- Please ensure that the wires connected to the rain sensor connector are correct and are
made with a secure connection.
FOR THE LATEST TROUBLE SHOOTING GUIDE PLEASE REFER TO
http://keyliteroofwindows.com/downloads/
KL/RX2-2012G
THE INSTALLATION OF THIS SYSTEM MUST BE CARRIED OUT BY A QUALIFIED ELECTRICIAN
THE GUARANTEE WILL BE VOIDED IF THIS IS NOT FOLLOWED
TROUBLE SHOOTING
Technical Data Intended Use
Type
Nominal Voltage
Rated Power
Temperature Range
Output Voltage
Safe output rated current
:KL/CTR6S
:110-240VAC, 47-63Hz
:1.4A
:0-40°C
:24V DC
:2.7A
- Ventilation and blind control of roof windows.
- Integrated receiver for radio remote control.
- Radio frequency 433MHz - approved for use in
Australia, Brazil, Europe, Malaysia,
New Zealand, Russia, Singapore, South Africa.
- Keeloq Rolling Code
- Multiple control panels controllable with only
one remote control.
- Only for inside mounting