KEYKING
GROUP
FPC1000 Biometric Controller User Manual
（
V1.00
）
Page 20 of 43
Keyking FPC1000
1
．
FP
2
．
FP/Card
3
．
FP+CARD
4
．
FP
5
．
User ID+card
Keyking FPC1000
Add card
Place your card
Keyking FPC1000
Level 1:1
（
0~9
）
:4
Keyking FPC1000
Enable 1: N
:
（
N=0/Y=1
）
:
Keyking FPC1000
〈
Add FP
〉
Put your FP
4.2.1.2 FP/Card
1.
Press 2 to enter add FP/Card interface.
This option will allow a person identity to be either Card or
Fingerprint
2
．
Swipe the card in front of the card picture (under the sensor); system
will enter the next interface after a beep sound.
3.
Hit ENTER to go to the next screen
Level 1:1 apply to Card+Fingerprint mode ONLY. The number
represent how strict the verification is done. 4 is normal, higher
number will provide higher security, but, might result in multiple
attempts by authorized users. Lower number will make the unit
faster to response and comply with problematic fingers, but, might
authorize unauthorized persons.
4.
Hit ENTER to go to the next screen
If entered 0, the unit will require ID or Card before fingerprint,
with 1 (default) the unit will read the finger as it is laid on the
sensor.
5. Follow the instructions on the screen, the unit will require two finger
scans, let the unit 2 seconds scan time for each finger.
If scan failed, the FPC1000 will go back to the main menu and
the process will begin from Main Menu 4.2.1
