6
XB2 Kit
Connectors and pots at the rear side
Left to right:
LESLIE
Standard 11-pin Leslie® speaker connector for newer Hammond Suzuki loudspeaker
cabinets. Not suitable for 9-pin Leslie® speakers with passive adaptor due to different polarity of
switching voltages. We recommend using a Leslie® preamp for 6-pin and 9-pin Leslie® speakers.
Of course, this output only works if the optional HX3.5 Extension Board is installed.
USB
USB B-type connector for MIDI over USB, for updates and configuration by HX3.5 Manager
application.
Headphone
¼” stereo jack. Headphone amplifier output.
Audio L
¼” mono jack. Audio output left channel (line level).
Audio R
¼” mono jack. Audio output right channel (line level).
Swell
¼” stereo jack. Expression pedal input is compatible with Yamaha FC-7 and similar
expression pedals (direct connection preferred for speed/accuracy, but may also be remote
controlled by MIDI control change, controller 11). Plug connection: Sleeve = ground /
potentiometer start, ring = potentiometer tap, tip = potentiometer end.
Footswitch
¼” stereo jack. Single or double foot switch controls simulated rotary speed as well as
external rotary cabinet speed: SLOW/FAST on plug tip, RUN/STOP on plug ring. Please use
latching foot switches; momentary (button type) switches are not supported. If single foot switch is
used, Rotary is always on RUN (no plug ring, input grounded by plug sleeve). The switch affects
both the internal simulation and an externally connected Leslie®.
Potentiometers
Bass, Treble
Equalizer settings.
FOOT SWITCH socket is not used.
WiFi antenna
(optional).
MIDI OUT1, MIDI OUT2
MIDI outputs for connecting external devices or DAW. The HX3/XB2
generates MIDI signals with a velocity component, which can also be used to control piano
expanders, for example.
MIDI IN
Input for MIDI signals from any MIDI-capable keyboard or pedal.
The CC Sets for MIDI input and outputs are selectable and can be edited with the CC Set Editor.